Nickel Safi 200/Uns No2200 Waya 0.25mm
Daraja:Ni200,Ni201,N4,N6
Ductility ya juu
Upinzani bora wa kutu
nguvu nzuri ya mitambo
Maelezo ya Aloi
Nickel 200/201 ni daraja linalotumiwa sana, kwa ujumla limeainishwa kwa vifuniko vya transistor, anodi za mirija ya kielektroniki, miongozo ya vifaa vya kielektroniki / Waya za Kuongoza kwa taa na kwa Wire-Mesh. Pia hutumika katika hali ya utepe kwa matumizi mbalimbali ikiwa ni pamoja na betri za Ni-Cd.
Hali ya Ugavi
Nickel 200, 201 na 205 hutolewa katika hali zifuatazo:
Baridi Inayotolewa, Hasira Maalum.
Inayotolewa kwa Baridi, Iliyoongezwa. Imenyooshwa na Kukatwa Urefu.
Kumbuka:
NUS N02201 (ASTM B 162) sawa na N4 (GB/T 2054).
NUS N02200 (ASTM B 162) sawa na N6 (GB/T 2054).
Fomu
Coil - Ukanda, Foil, Ribbon
Waya - Profaili, Mviringo, Gorofa, Mraba
fimbo, bar, forgings, sahani, karatasi
Muundo wa kemikali
Daraja | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
Ni201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Uwezo wa Foil ya Nickel
Daraja | Ukanda Safi wa Nickel 99.6% / 99.9% |
Unene | 0.002 hadi 2.50 mm |
Uvumilivu | +/- 5% (uvumilivu maalum unapatikana) |
Upana | Hadi 350 mm kwa upana |
Ukubwa wa coil | Hadi kilo 80 bila welds |
Viwango vya Hasira | Imeunganishwa kwa Ngumu Kamili |
Usahihi wa Bidhaa ya Nickel Foil
Unene | Unene posho | Burr urefu | Upeo wa upana na uvumilivu | |||||
2≤w<10 | 10≤w<50 | 50≤w<100 | 100≤w<150 | 150≤w<200 | 200≤w | |||
0.02≤t<0.05 | ±0.003 | ≤0.005 | ± 0.05 | ±0.10 | ±0.15 | ±0.20 | ±0.30 | ±0.50 |
0.05≤t<0.1 | ±0.005 | ≤0.01 | ||||||
0.1≤t<0.2 | ±0.008 | ≤0.015 | ||||||
0.2≤t<0.3 | ±0.012 | ≤0.02 | ||||||
0.3≤t<0.4 | ±0.015 | ≤0.03 | ± 0.10 | ±015 | ±0.25 | ±0.50 | ±0.80 | ±1.00 |
0.4≤t<0.6 | ±0.025 | ≤0.05 | ||||||
0.6≤t<0.8 | ±0.030 | ≤0.06 | ± 0.30 | ±0.40 | ±0.50 | ±0.50 | ±0.80 | ±1.00 |
0.8≤t<1.0 | ±0.040 | |||||||
1.0≤t<1.2 | ±0.050 | ≤0.08 | ± 0.50 | ±0.50 | ±0.80 | ±1.00 | ±1.00 | ±1.50 |
1.2≤t<1.4 | ±0.060 | |||||||
1.4≤t<1.7 | ±0.070 | ≤0.10 | ||||||
1.7≤t<2.0 | ±0.080 |